How to remove carpet from under RV Slide Out

How to remove carpet from under RV Slide Out- The 360 Guide

Introduction

Yes, it’s important to remove carpets from the slide-out in your RV. I mean, no one loves an old saggy carpet, do they? However, it’s not always about the looks as carpets can also provide structure to the RV’s interior. 

On the other hand, if the carpets cause problems in the structure of the RV, it won’t be safe for you. So, yes it’s important for you to remove the carpet as your RV floors are important too. 

But, in case you might be wondering how to remove carpet from under RV slide out, let me tell you something. 

Carpet removal isn’t so easy if you haven’t done them before. But it’s easy once you’ve learned it through a proper guideline. In fact, we’ve compiled a complete step-step process for you in this article. Moreover, we’ve discussed some common questions about this problem in the FAQ session.

So, without any further ado, let’s start. 

6 Steps of Removing Carpet from under the RV Slide Out

You might hear from others that carpet removal is one of the hardest things to do in an RV. And you might be wondering what’s so hard about it? 

Well, no one likes to rip off the carpet from the RV, do they? But, don’t worry, you won’t have to put in more effort than you’re supposed to. In fact, if you can follow the step-step procedure below, you can pull the task off pretty easily. 

So, let’s look at what things you should be focusing on when preparing for the carpet removal: 

Tools 

Yes, you’ll need a set of tools to perform this job. However, they’re easily available in the local markets. Moreover, you won’t have to break your bank in the process as they’re affordable. Let’s take a look at them: 

After you’re done managing the tools for the job, let’s look at the whole step-step process: 

Step 1: Cutting off the Carpet’s Edge 

Start using the razor blade to cut the carpet’s edge. Also, make sure that you’ve started in the middle. By doing this, you won’t have the chance to cut any paddings under the carpet.

Turns out, many RVs do have paddings under their carpet so always look out for them. 

Step 2: Pull the Carpet 

Pull upwards whenever you’re cutting the carpet from the Slide Out. Now doing this has two benefits- 

  • This makes it easy to cut the edges. 
  • You won’t accidentally cut any insulation underneath the carpet. 

Also, use your fingers to pull up the carpet so that you’re not pulling anything from under the carpet. By doing this, you won’t cut anything from under the carpet that you’re not supposed to cut. 

But, make sure you have protective gloves on so that you don’t accidentally cut your fingers in the process. 

Step 3: Scrape off the Glue from Underneath

Scrape the glued parts off the carpet. After you’re done, continue in pulling the other parts like before. 

Apart from this, pulling it hard enough will do the trick. But be careful about the parts that are stapled. 

Step 4: Remove All the Screws

Make sure that you’re removing all the parts that have been screwed to the floor. But how are you going to do that? 

Well, cut around those parts using a razor blade and start taking the screws off using a screw extractor. However, if you don’t have the screw extractor you can also use a wrench as an alternative. 

On the other hand, you should use hammers on areas that have small nails and screws. A hammer can easily take those off without any problem. 

How’s that?

Well, a hammer can also be used to provide leverage when pulling the carpet off. At times, it’s hard to pull them but you can easily use a hammer to pull the carpet too. 

Step 5: Be careful to not Cut or Damage the Vinyl Underneath 

Always make sure the razor blade that you’re using is up and not too close to the vinyl of the RV. This is because you don’t want to damage the vinyl of your RV. 

Hence, using the knife up won’t damage the vinyl underneath. A pro tip will be to go slow when you’re cutting the carpet. 

Step 6: Use a Cleaner on the Removed Parts

Clean the parts that you’ve removed. Using a normal cleaner will do it. But, before doing that, take a vacuum cleaner and clean the dust off of the carpet parts. 

But why should you do it? 

Well, your floor was under the carpet all this time. Hence, it’s essential that you first take the dust off of them. After this, use the cleaner on the parts. Put the cleaner on them and then wipe them off using a paper towel. 

Lastly, put the paper towels in a trash bag so that you don’t end up making your RV dirty. 

How to remove carpet from under RV Slide Out – FAQs

Question: How much does it cost when you’re replacing the carpets in an RV? 

Answer: It’ll cost you around $600-$6000 when replacing the carpets. 

Question: Why do RV slide outs have carpet on them? 

Answer: They have a carpet so that the slide doesn’t drag the main floor when it’s coming in. 

Question: Can I leave my slide outs open all the time? 

Answer: No, the slide outs take a lot of space. Keeping them open all the time will cause problems. 

Final Words 

That’s all we got for you. Hopefully, by reading this article, you’ll get an idea about how to remove carpet from under RV slide out. 

In the end, we’ll like to say that even the task might seem hard for you, it’s still easy to pull off. But, if you’re not confident enough in doing this by yourself then get a professional to do it for you. 

So, why don’t you give it a try? Good Luck. Happy Camping.

As an Amazon Associate I earn from qualifying purchases.

Leave a Comment

Your email address will not be published. Required fields are marked *

x
Scroll to Top